| Your personal background. |
|---|
Japanese and British (and American) motorcycles. On some transmissions that just can't be done all that well, particularly on pre-1981 motorcycles.
See remarks below for 5 speed transmissions. Listing of parts, photos, shift kit items,
etc. Site will further your education on the 4 and 5 speed
transmissions. If using the new shift kit, which I highly recommend be fitted at the same time, the parts are upgraded and don't need modification (Or they
are supposed to, I found one old shift pawl in a shift kit recently).
You need to know what to look for when you are
comparing companies so the repair technician who comes to your home is educated and courteous.
You need to understand the differences in the taps such as style.
Thread the hole (use a metric size), add a large flat washer larger than the shaft diameter,
& use Loctite blue or red on the steel ONLY bolt you will
add to hold the washer to that shaft.
The owner drilled the shaft, added a large flat washer & bolt; heated the rear cover & used the
bolt to pull the shaft back into position. One of the
reasons I decided to open an appliance repair company years back was to handle these types
of situations fairly. These four common sense appliance
repair tips may save householders time, disappointment and also wasted hard work.
Upward shifting may be easier. Otherwise, you may have to slightly engage the
clutch or do a 'double clutching', play with rpm, etc.
when you want to shift from Neutral to first gear when starting
off. Some parts must speed up, some parts must reduce speed,
in order to enable dogs meshing and gear teeth meshing.
A lot of things must happen in a tiny fraction of a second, and in the correct
order and timing. NOTE that BMW transmissions tend to take a lot of miles to fully
break-in. Some, such as myself, believe that it is best to break-in a newly
overhauled transmission using 80W90 petroleum oil, and after a few
thousand miles, switch to a full synthetic, with which many of us believe that the transmission will last a lot
longer.
I recommend, but not overly strongly, that you not do this, although if
you practice, it is not necessarily hard on the transmission once you learn to do it correctly.
I recommend that the simple fix be done with the transmission removed from the motorcycle.
The "simple fix" involves drilling & tapping the shaft, adding a small bolt and large washer.
Don't use too small or two large a bolt size, and use a decent amount of heat.
The boss was a problem in the 1974, & maybe some 1975 production, & the oversize boss
was fixed no later than sometime in 1975. I believe that,
from then, the springs break from improper heat treatment,
or fatigue, or too soft or too hard, maybe brittle; seems to be a difficult part to manufacture correctly?
If the shaft has started to move, you might be able to drill the shaft,
install a steel bolt and washer, and I suggest you heat
the transmission rear cover, and then pull the shaft
into position with the bolt as noted in the earlier paragraph.
Do not use a weak brass screw, do not use anything but a steel bolt.
If someone offered a poor or worse than average review for recent refrigerator repairs, so don't use his service.
We offer service to the residents of northern, UT.
25 Off - Seniors: We’re proud to offer a special discount of $25 off to all seniors who are 65
years or older. First of all, choose the agency who will be near
to you. Samsung and L.G. will have tariffs on washers of 20
percent to the first 1.2 million and 50 percent on components after.
Unless you can get one of the two gears to move at least slightly, you
will not get meshing. Very often it can save you a small
fortune with the old appliance repaired as well as include several years to its life.
The professional range is the luxury appliance of choice for
cooking. Now, you have the luxury of comfort and convenience of your
home appliances. Little home appliances are uncomplicated equipment that can be repaired very easily if they get broken as compared to
important home equipment that are really significantly complex.
Feel free to surf to my web page "http://www.Bonniesdelights.com/index.php?a=stats&u=kylecommons693 |
| Your feedback on this profile |
|---|
| Recommend this profile for User of the Day: |
I like this profile |
| Alert administrators to an offensive profile: |
I do not like this profile |
|
| Account data |
View |
| Team |
None |
|