Profile: PeteMonsoor8

Your personal background.
Japanese and British (and American) motorcycles. On some transmissions that just can't
be done all that well, particularly on pre-1981 motorcycles.
See remarks below for 5 speed transmissions. Listing of parts, photos, shift kit items, etc.
Site will further your education on the 4 and 5 speed transmissions.
If using the new shift kit, which I highly recommend be fitted at
the same time, the parts are upgraded and don't need modification (Or they are supposed to, I
found one old shift pawl in a shift kit recently). You need to know what to
look for when you are comparing companies so the
repair technician who comes to your home is educated and
courteous. You need to understand the differences in the
taps such as style. Thread the hole (use a metric size), add a large flat
washer larger than the shaft diameter, & use Loctite blue or red on the steel ONLY bolt you will add to hold the washer to that
shaft.

The owner drilled the shaft, added a large flat washer & bolt; heated the rear
cover & used the bolt to pull the shaft back into position. One of the
reasons I decided to open an appliance repair company years back
was to handle these types of situations fairly. These four common sense appliance repair tips may save householders time,
disappointment and also wasted hard work. Upward shifting may be easier.
Otherwise, you may have to slightly engage the clutch or do
a 'double clutching', play with rpm, etc. when you want to shift from Neutral to
first gear when starting off. Some parts must speed up, some parts must reduce speed,
in order to enable dogs meshing and gear teeth meshing.
A lot of things must happen in a tiny fraction of a second, and in the correct order
and timing. NOTE that BMW transmissions tend to take a lot
of miles to fully break-in. Some, such as myself, believe that it is best to break-in a newly overhauled transmission using 80W90 petroleum oil, and after a
few thousand miles, switch to a full synthetic, with which many of us
believe that the transmission will last a lot longer.

I recommend, but not overly strongly, that you not do this, although if
you practice, it is not necessarily hard on the transmission once
you learn to do it correctly. I recommend that the simple
fix be done with the transmission removed from the motorcycle.
The "simple fix" involves drilling & tapping the shaft, adding a small
bolt and large washer. Don't use too small or two large a bolt size, and use a decent amount
of heat. The boss was a problem in the 1974, & maybe some 1975 production,
& the oversize boss was fixed no later than sometime in 1975.
I believe that, from then, the springs break from improper heat treatment, or fatigue, or too soft or too hard,
maybe brittle; seems to be a difficult part to manufacture
correctly? If the shaft has started to move, you might be able
to drill the shaft, install a steel bolt and washer, and I suggest you heat the transmission rear
cover, and then pull the shaft into position with the bolt as noted
in the earlier paragraph.

Do not use a weak brass screw, do not use anything but a steel bolt.
If someone offered a poor or worse than average
review for recent refrigerator repairs, so don't use his service.
We offer service to the residents of northern, UT. 25 Off - Seniors: We’re proud to offer a special
discount of $25 off to all seniors who are 65 years or older.
First of all, choose the agency who will be near to you.

Samsung and L.G. will have tariffs on washers of 20 percent to the first 1.2 million and
50 percent on components after. Unless you can get
one of the two gears to move at least slightly, you
will not get meshing. Very often it can save you a small
fortune with the old appliance repaired as well as include several years to its life.
The professional range is the luxury appliance of choice for cooking.
Now, you have the luxury of comfort and convenience of your
home appliances. Little home appliances are uncomplicated equipment that can be repaired very easily if they get broken as compared to important home equipment that are really significantly
complex.

Look into my blog "https://asteroidsathome.net/boinc/view_profile.php?userid=621772
Your feedback on this profile
Recommend this profile for User of the Day: I like this profile
Alert administrators to an offensive profile: I do not like this profile
Account data View
Team None